Laser Printer Drum Unit : Maintenance Tips

Laser printers have built-in control devices that signals the user about an anomaly in the device’s operation. When printouts are not as crisp as it used to be and print defects likewise materialize, the LCD would likely prompt the immediate clean up of the drum unit. Whenever the drum unit is due for maintenance, the user has 2 options – either opt for dealer servicing of the laser printer to let them do the dirty job or conduct the maintenance work themselves. If the user prefers the latter, then we have helpful cleaning tips outlined below.

Before performing any maintenance works on the drum unit, take hold of the manual and study more closely the process involved; particularly the dismantling and reassembly of pertinent parts following clean up. In most instances, excess toner sticking on the surface of the photoreceptor drum is the primary cause for print quality defects that is typically collected during paper jams.

What worst than a faulty printer is not having any clue on how to deal with it. Learn troubleshooting techniques and printer maintenance tips from this blog.

Do not touch the drum or overexpose it to light. The photoreceptor drum is photosensitive so take care not to overexpose the unit to light sources. The drum is likewise prone to scratches and dents so remember not to let your fingers touch the surface. Moreover, oil and sweat emanating from the fingers are acidic and could interfere with its photoreceptor function to result in print defects.

Do not use detergents to clean the drum. It is not advisable to use cleaning products such as detergents to clean the photoreceptor drum. Applying chemicals could likely cause damage to the drum’s surface. Instead use paper and some cotton buds to get rid of toner residues.

Clean pertinent parts of the drum assembly. The drum assembly compose of the wiper blade, grate, metal guide roller, the photoreceptor drum and the foam roller. While cleaning the rollers is a must to rid it from loose toner sticking to its surface, what requires thorough maintenance include the wiper blade, grate and the cavities of the assembly. As much as possible, use suction over the rollers and crevices to blow off excess toner. It is necessary to clear toner residues over the foam roller as said device is designated to clean the drum. Know that a toner-saturated foam roller can trigger backgrounding.

Once the necessary maintenance procedures have been completed, reassembly of the cartridge unit should come out easy as it is only the reverse of disassembling and putting all the loose parts together. Before proceeding with waiting print jobs, what is recommended is to monitor the restored drum assembly if it rotates regularly and is cleaned properly.

Likewise check the toner cartridge if it has sufficient toner before loading the drum assembly, if not refill the empty cartridge with a compatible toner refill kit and print a few copies for quality. In case the drum has been damaged and is no longer serviceable, you can always get a replacement from OEM sources or from a third party sources. Compatible drum kits such as the Brother DR-510 Compatible Drum is more affordable while set with the same specifications as its OEM counterpart.

Doing maintenance work on your laser printer drum unit is not much to fret about, but the process could be messy if not handled precisely.

Is the OPC drum of your laser printer worn out? Shop for a compatible replacement now at http://www.lasertekservices.com and enjoy big savings.

You Might Also Like

No Comments

Leave a Reply